Orangatang Nipples Longboard Truck Bushings (Set of 4)

MAXIMUM SUPPORT / HIGH ENERGY

Are you feeling a chill in the air, or can your energized bushings take credit for that? Pop these plump darlings into your trucks and get ready to spring out of each carve with an abundance of energy and bounce. Crafted with Orangatang’s lively and energetic Randy Urethane formula, these bushings are sure to elevate your ride.

The package includes two tall barrel bushings (0.66″ H x 1″ D), two short barrel bushings (0.56″ H x 1″ D), and four thin, sturdy flat washers.

COMPATIBILITY

Nipples are NOT suitable for every truck on the market. They are compatible with Paris V2 and V3, Carver CX and C2, Tracker Fastrack, and Randal reverse kingpin trucks. However, they are NOT suitable for traditional kingpin (street) trucks such as Independent trucks or Paris Street Trucks. If your truck is not mentioned in the list, it may not be compatible, so please check the measurements and compare them with your current bushings.

LONGBOARD BUSHING SPECS

Diameter: 1″ (25.4 mm) Height (top / road side): 0.56″ (14.2 mm) Height (bottom / board side): 0.66″ (16.8 mm) Formula: Randy Thane Durometers: soft (orange), medium (purple), hard (yellow)

RECOMMENDED WEIGHT RANGES

Orange / Soft: 75-200+ lb / 34-90+ kg Purple / Medium: 150-250+ lb / 68-113+ kg Yellow / Hard: 175-275+ lb / 79-125+ kg

INSTALLATION

Both top and bottom Nipple bushings feature a subtle chamfer on one edge which improves performance with cup washers. Orangatang recommends installing Nipples with the chamfer (or bottom of the printed graphic) oriented toward the washer, but feel free to experiment.

LIVELY LONGBOARD BUSHINGS – These large and vivacious bushings are designed to provide you with maximum support and high energy for springing out of every carve. Crafted from Orangatang’s extremely high-rebound Randy Thane formula, they are perfect for responsive, energetic turning. An excellent high-rebound upgrade for carving, pumping, dancing, and freestyle longboarding setups.

RESPONSIVE DESIGN – Slightly wider and taller than most stock truck bushings, Nipples provide your trucks with more support and more material to squish, resulting in a highly responsive ride.

COMPATIBILITY – Nipples work great on Paris V2 and V3, Carver CX and C2, Tracker Fastrack, and Randal reverse kingpin trucks. They do not work on any traditional kingpin (street) trucks. If your truck is not on this list it may not be compatible, so please check the measurements and compare with your current bushings.

THE PERFECT SET – Each pack includes two tall barrel bushings (0.66″ H x 1″ D), two short barrel bushings (0.56″ H x 1″ D), and four thin and strong flat washers.

ORANGE / SOFT – Great for tight turns and maximum response.

product information: